Our DC Fast EV Charging Station with big Advertisement Display Screen with120KW /160KW/240KW power.
Name :
DC Charging station with big Advertisement Display ScreenItem No :
DC-08-43Max Power :
240IP Degree :
55Customization :
YesOrder(MOQ) :
2 setsWarranty :
2 yearsStandard :
GB/T, CCS2As the market leader in power electronics, Esafe brings you high-efficient Fast DC EV Charger . Commercial Fast EV Charger Station are usually installed at EV charging point, parking lot, underground garage, highway service station, bus charging station, EV truck charge stations and etc.
Commercial Fast EV Charger Station provides DC power directly to the battery, bypass limited of the on-board charger and required conversion, Charging speed is greatly increased. Charging speed not only depends on the power of the DC Charging Station, but also depends on the limitations of the EV car's receivable power, battery management systm (BMS), ambient temperature, own battery balance and other factors. Most EV cars get 80% capable charge within one hour By DC Fast charging stations.
To use Commercial Fast EV Charger Station , the driver typically needs to have a compatible charging port on their vehicle and a charging cable that can handle the high power output of the charger.
Parameters of Commercial Fast EV Charger Station
Commercial Fast EV Charger Station with advertisement Display Screen has power from 120KW-240KW.
Commercial Fast EV Charger Station |
120KW with 2 GBT Guns |
AC Voltage |
3-phase+N+PE, 400/480Vac(±10%) |
AC Frequency |
45-65HZ |
Total harmonic current |
<5%(Rated input) |
Power Factor |
>0.99 |
DC Voltage accuracy |
<±0.5% |
Output DC Voltage |
DC 150V-1000V |
Max Current |
250A |
Max DC output Power |
120kW |
Max system efficiency |
>95%(Rated input and output) |
Ambient temperature |
-30~ +50℃ |
Humidity |
5%~95%RH |
Working altitude |
<2000m |
Protection Class |
IP55 |
Metering |
DC energy meter |
HMI |
7inch tempered glass protective touch screen LCD, RFID, RGB panel light |
Monitor interface |
OCPP1.6J, LAN/WIFI/LTE wireless modem support |
Module protection |
Over current protection,Short circuit protection, Over voltage protection, Under voltage protection |
|
JD_DC_160KW |
JD_DC_240KW |
AC Voltage |
3-phase+N+PE, 380/400Vac(±10%) |
|
AC Frequency |
45-65HZ |
|
Total harmonic current |
<5%(Rated input) |
|
Power Factor |
>0.99 |
|
Output parameters |
JD_DC_160KW |
JD_DC_240KW |
DC Voltage accuracy |
<±0.5% |
|
Output DC Voltage |
DC 150V-1000V |
|
Connector configuration |
250A 1000V CCS1 |
|
Max DC output Power |
160kW |
240kW |
Max system efficiency |
>95%(Rated input and output) |
|
Working environment |
|
|
Ambient temperature |
-25 ~ +70℃ |
|
Humidity |
5%~95%RH |
|
Working altitude |
<2000m |
|
Standard |
|
|
CCS PLC communication |
DIN70121 and ISO15118 |
|
Protection Class |
IP55/IK10 |
|
Function |
|
|
Metering |
DC energy meter |
|
HMI |
7inch tempered glass protective touch screen LCD, RFID, RGB panel light |
|
Monitor interface |
OCPP1.6J, LAN/WIFI/LTE wireless modem support |
|
Module protection |
Over current protection,Short circuit protection, Over voltage protection, Under voltage protection |
|
Charger protection |
Insulation monitor,Protect Earth connect monitoring, Reverse polarity protection, Over temperature protection |
|
Configuration |
|
|
Charger module configuration |
4 power module slots, 1000V40kW power module for 160kW; 6 power module slots, 1000V40kW power module for 240kW. |
|
Connector configuration |
2 CCS1 |
|
Light |
Charging status RGB light |
|
Mechanical |
|
|
Dimensions(W*H*D) |
1800(H)x 700(W)x400(D) |
|
Weight(kg) |
- |